The Control Gadgets below are devices designed for use with automation systems such and AMX, Crestron, C-Bus and Dynalite. Most of these gadgets are RS232 controlled and so are compatible with any control system.

CG-DMX48 / CG-DMX100

The CG-DMX48 allows control of up to 48 channels of DMX from a RS232 interface using a simple ASCII commands or CBUS commands.

It is suitable for control of most DMX devices including RGB LED strips and Moving lights. We also have firmware allowing 100 DMX channels which does not have LED shows.

* Features: Compatible with AMX, Crestron and CBUS
* 24 Internal RGB LED themed shows triggered by a single command.
* Simple to configure
* DMX fade times from 1s to 60s
* Free configuration software

more..

CG-WS2300 INTERFACE

The CG-WS2300 is a protocol converter for the WS2300 weather-station. It is compatible with the Lacrosse WS-2300 weather station and others. The interface provides real time data (updated every 30 seconds) for display on the touch panel. This data can also be used to assist the control system with looking after your home.

Such as:

• Close blinds when the temperature gets to high
• Suspend watering if it has rained recently
• Retract awnings if too windy

This is a great addition to your automation system. The package comes with sample code and user interface (touch panel layouts) for AMX and Crestron. We have seen LaCrosse Ws2316 weather stations at Bunnings (in the watering section)

more..

CG IVR-8

The IVR-8 is an interactive voice response system (like phone banking) designed for the remote control of domestic/commercial electrical products via the public telephone network.

The IVR-8 allows up to 8 devices to be controlled using DTMF tones using a standard modem or GSM dialer. The user calls from an external telephone and is prompted for keystrokes by voice prompts.

Compatible with Dynalite, CBUS and Major control systems. It connects to a standard phone line using a Netcomm RoadsterII (Rockwell compatible) modem.

more..